|
|
|
REMOTE FUEL FILL PANEL
A U/L Listed, NEMA 3R enclosure, remotely mounted
that is used to monitor tank fuel level filling activities.
At 90% fuel fill, alarm horn activates and a light
illuminates (alarm horn and silence switch included).
At 95% an alarm horn sounds, light illuminates, and
an optional N/O solenoid valve (opt #361), if installed,
closes allowing no more fuel to enter tank. This
model, #226, is designed for mounting onto a wall,
post, etc.
The two option shown below are variations to
the REMOTE FUEL FILL PANEL.
|
|
|
| |
| |
|
|
|
WALL-FLUSH MOUNTING of REMOTE FUEL FILL
PANEL
Necessary brackets needed to recess mount the
panel enclosure (not the door) into wall. Does not
include option #226
|
| |
|
|
|
ASSISTING PUMP and MOTOR for REMOTE FUEL
FILL PANEL
The controls, brackets, etc. necessary to mount a
single pump and motor to pump fuel to a non-gravity
fill main storage tank.
NOTE: Specify / order pump and motor separately
according to requirements.
|
|
|
REMOTE FUEL FILL STATION
|
|
|
|
 |
|
|
|
A lockable, U/L Listed, NEMA 3R, dual-door enclosure designed to
accommodate delivery truck curb-side filling of storage tank via hose
connection. Inside are two compartments:
- the right side has a brass Cam-and-Groove fitting, a check valve, a
manual shut-off valve, and a 7-1/2 containment sump;
- the left (isolated) side has the electrical components required to monitor
fuel activities and report abnormal conditions.
When the tank being filled reaches a 90% set point, a warning light comes on
and an alarm horn sounds. If filling continues, a second light comes on at 95%
capacity and an alarm horn again sounds. At this time, an optional solenoid
valve (opt 361) will close allowing no more fuel to enter the tank. A silence
switch and remote contact outputs are standard.
Remote Fill Stations are available in three configutations:
|
|
|
230-22
230-32
230-33
|
2" cam-and-Groove fill connection with 2" plumbing and outlet.
3" cam-and-Groove fill connection with 2" plumbing and outlet.
3" cam-and-Groove fill connection with 3" plumbing and outlet.
(Available in 120vac, 12vdc, and 24vdc - specify.)
The two option shown below are variations to the REMOTE FILL
STATION.
|
| |
|
|
|
WALL-FLUSH MOUNTING of REMOTE FILL
STATION
Necessary brackets needed to recess mount the fill
station enclosure (not the door) into wall. Does not
include option #230
|
| |
|
|
|
ASSISTING PUMP and MOTOR for REMOTE FILL
STATION
The controls, brackets, etc. necessary to mount a
single pump and motor to pump fuel to a non-gravity
fill main storage tank.
NOTE: Specify / order pump and motor separately
according to requirements.
|
|
|
FUEL DELIVERY CONTROL STATION
|
A lockable, weatherproof, free-standing enclosure with a 20-gallon spilled fuel
containment area. The 2”or 3” main fuel line features:
- a brass Cam-and-Groove fitting for standardized lock-on filling;
- a check valve to prevent “back-fill” flooding
Any spilled fuel falls into the 20-gallon sump where it can be either manually
drained or pumped back into the main fuel line using an included hand pump.
|
|
232-22
232-32
232-33
|
2" cam-and-Groove fill connection with 2" plumbing and outlet.
3" cam-and-Groove fill connection with 2" plumbing and outlet.
3" cam-and-Groove fill connection with 3" plumbing and outlet.
The option shown below is a variation to the FUEL DELIVERY
CONTROL STATION.
|
| |
|
|
|
ASSISTING PUMP and MOTOR for FUEL
DELIVERY CONTROL STATION
The controls, brackets, etc. necessary to mount a
single pump and motor to pump fuel to a non-gravity
fill main storage tank.
NOTE: Specify / order pump and motor separately
according to requirements.
|
