Pryco's FUEL CONTROL and MONITORING
(FCM)
is a solid-state electronic system designed
to control, monitor and report the activities of the
overall fuel supply system.  It is the most
sophisticated control tool available -- electronic or
mechanical.  

It may be mounted on a day tank, a subbase
tank, a remote pumping unit, or it may be
"off-mounted" anywhere within cable distance of
its ultra-sonic sensor.
Enclosed FCM
Day Tank Mounted
 

The FCM system is designed to be mounted on a day. tank, sub-base tank, or a remote pumping unit.  It may also
be off-mounted to a wall unit, etc. (only the sensor must be tank mounted.)

The FCM system uses an ultra-sonic sensor to accurately determine the level of the fuel.  Backing this sensor up
is a fail-safe, redundant high level mechanical sensor.

Through electronic "action levels" the FCM controls the activities of up to four pumps and motors (Fill or Reverse
Flow).  It also controls and provides a signal for a full array of external alarms and similar devices based upon
predetermined levels.  The action levels shown in the table below represent a normal* setup.   Custom levels may
be programmed providing the integrity of a sequence of operation is not violated.  There is no extra charge for
this level customization.

We designed the FCM to include many features and functions as
standard.  This helps keep down the cost to our
customers while raising the overall effectiveness of the product.  To view a complete list and description of these
Standard Features, click on the "Standard Features" link above.

Although the FCM has most of the bases covered with standard features, there are some applications where
optional components, such as duplex pumps and motors, or reverse flow systems, are necessary.  To view a list
and desctiption of FCM Optional Components,  click on the "FCM  Options" button above.

The chart below show various "normal action" levels -- where pump motors, alarms, etc. are switched on and off.  
These may be changed to meet your specifications.  Some manufactures of similar equipment charge extra for
anything that is not their normal setting.  Their similar control system is not dynamically programmable and must
be mechanical altered.
.
Download Complete FCM Detail Specs (pdf) - Click on FCM Icon --->
FCM  NORMAL  ACTION  LEVEL  CHART
ACTION LEVEL
PY5 -
PY10
PY15
PY25
PY50
PY60
PY75 -
PY150
PY200 -
PY1000
Top Of Tank
ALL MODELS - ALWAYS 0.0"
Safety High Level
ALL MODELS - ALWAYS 3.0"
High Fuel Level
ALL MODELS - ALWAYS 3.5"
Secondary Reverse Flow - ON [If Installed]
ALL MODELS - ALWAYS 4.0"
Primary Reverse Flow - ON [If Installed]
ALL MODELS - ALWAYS 4.5"
Fill Pumps - OFF (100% Full)
ALL MODELS - ALWAYS 5.0"
Reverse Pumps - OFF [If Installed]
5.5
6.0
6.0
6.0
6.0
6.0
6.0
Primary Fill Pump - ON
6.0
8.0
8.0
8.0
8.0
8.0
10.0
Secondary Fill Pump - ON [If Installed]
6.5
10.0
10.0
10.0
10.0
10.0
14.0
Low Fuel Level
7.0
12.0
14.0
14.0
14.0
14.0
18.0
Critical Low Level [If Installed]
8.0
14.0
19.0
26.0
34.0
39.0
44.0
Dry Tank Protection Level
9.5
15.5
20.5
27.5
35.5
40.5
45.5
Empty Tank (0%)
12.5
18.5
23.5
30.5
38.5
43.5
48.5
The content of this website is copyrighted (c) 2006 - All rights are reserved.
Please refer to our site
disclaimer.
FUEL CONTROL & MONITORING SYSTEM
FCM Links