PRYCO DAY TANKS
The content of this website is copyrighted (c) 2008 - All rights are reserved.
Please refer to our site
disclaimer.
U/L LISTED
TANKS

Most Day Tank or Subbase Tank can be U/L Listed (Label 142).  In addition to the above
features, all U/L Listed tanks additionally have:
  • internal extra strength reinforcement;
  • a properly sized emergency vent (see  “U/L VENT” columns in appropriate tables on
    the following pages); and,
  • a U/L Listed label.

Pryco’s unique U/L File Numbers are:

    MH12807 which pertain to Day Tanks - specifically:
  • Aboveground Flammable for Liquid Tanks (Day Tanks);
  • Secondary Containment Aboveground Flammable for Liquid Tanks  (Day
    Tanks with Double Wall Construction); and,
  • Open Top Diked Aboveground Flammable for Liquid Tanks (Day Tanks
    with a Rupture Basin).

    MH17469 which pertain to Sub-base Tanks - specifically
  • Generator Base Tanks (Sub-base Tanks);
  • Secondary Containment Generator Base Tank (Sub-base Tanks with
    Double Wall Construction); and,
  • Open Top Diked Generator Base Tank (Sub-base Tanks with a Rupture
    Basin).

    E102372 which pertains to Industrial Control Panels - specifically our Enclosed
    Industrial Control Panel (option #465).
GENERAL SPECIFICATIONS
There are three basic designs of Pryco Day Tanks: Standard, Manual and Trim.  General characteristics
are:
  • Standard and Manual tanks have the same physical dimensions.  
  • Manual tanks however do not have a mounted pump, motor, float switch, and
    do not have a cover unless it is U/L Listed.  
  • Standard and the Trim tanks have the same standard equipment (shown
    below); however, the Trim design has a smaller footprint and  is taller.  

    All Pryco Day Tanks are fabricated of heavy gauge steel by certified welders.  Each tank is
    tested to 5 psi
    For detail specifications, select the basic design from the following links:
                                      Standard Design        Manual Design        Trim Design
TANK DIMENSIONS
Tank Dimensions are shown on pages arranged by tank size.
Select tank size (U.S. Gallon capacity) from the drop-down menu below:
FEATURE
STD
MANUAL
TRIM
  • Removable Inspection Plate w/Gasket
X
X
X
  • Fuel Level Gauge
X
X
X
  • Heavy Duty Float Switch
X
 
X
  • “Press-to-Test” Switch
X
 
X
  • "Pump Running" Indicator Light
X
 
X
  • Motor - 1/3 hp Thermally Protected, 120vac, 1ph, 60hz
X
 
X
  • Pump 2 gpm Bronze Gear w/Stainless Steel Shafts
X
 
X
  • Threaded Pipe Connections for:
     
  • Engine Supply and Return (w/Drop Tubes)
X
X
X
  • 2" Atmospheric Vent
X
X
X
  • Emergency Vent (If U/L Listed)
X
X
X
  • Pump-To-Tank Inlets and Outlets (w/Drop Tubes)
X
X
X
  • Overflow (Normally Back to Main Tank)
X
X
X
  • Tank Drain (w/Drop Tube)
X
X
X
  • Extra 2” Connection
X
X
X
  • Manual Fill Connection (2") w/Lockable Fill Cap
  X
 
  • If Double Wall Secondary Containment, Add Threaded
    PipeConnections for:
  • An Atmospheric Vent
  • An Emergency Vent (If U/L Listed)
  • Drain For Secondary Containment Area


X
X
X


X
X
X


X
X
X
  • Removable Top Cover
x
x
x
  • Epoxy Coating Inside
x
x
x
  • Pryco (Medium) Gray Exterior Paint (or an Industrial (Color of
    Choice)
x
x
x
DAY TANKS